Mitsui Seiki Horizontal Machining 4 axis HU Series

Description

HU Series:
• Box guide ways realize long term high-precision and high rigidity. Hardened box guide ways are attached to the surface which has high straightness and perpendicularity by scraping.
• The load to the column sliding section is reduced by air support from smooth high-speed feed despite the sliding method.
• Highly rigid Y-shaped integrated three-point support bed is adopted.
• Ball screws of all axes are placed in the center of the sliding surface to minimize the position difference. (In the case of standard main axis of HU63A/HU80A)
• Numerically controlled with all standard equipment and features including: Automatic Tool Changer, Automatic Pallet Changer, and high production capability for drilling, boring, tapping and reaming.
• Integrated circuit logic, closed loop, complete electrical equipment for operation on: 3-phases, 50/60Hz, 200/220 Volts AC.
• Standard Control Fanuc 30i 

Model HU40A 
X axis - 22.05"
Y axis - 22.05"
Z axis - 22.05"
Pallet size - 15.7" x 15.7"
Spindle speed min (-1) - 80~8000 {Op. 12000/2,000} 

Model HU80A
X axis - 47.24"
Y axis - 37.40"
Z axis - 35.43"
Pallet size - 31.5" x 31.5"
Spindle speed min (-1) - 15~6000 {Op. 12000/20000} 

Specifications

Quantity Available 1
Type Horizontal Machining Center
Condition New

Pricing



Manske Machinery, Inc.
414-543-8800

© 2019 All information in this site is deemed reliable but is not guaranteed and is subject to change | Powered by vFlyer Website Builder